The v1.3.1 installer like all our other software is signed by Applied Computer Concepts Ltd and countersigned by Sectigo RSA. You just need to select properties on the installer to see it has a valid (expensive ) digital signature. The fault is with Norton.
Version 1.3
Moderators: Watchman, Mark Uniacke, mrudolf
- Mark Uniacke
- Hiarcs Author
- Posts: 1459
- Joined: Sun Jul 29, 2007 1:32 pm
- Location: United Kingdom
- Contact:
Re: Version 1.3
-
- Member
- Posts: 4
- Joined: Mon Oct 18, 2021 3:54 pm
Re: Version 1.3
I have an iMac running under MacOs Catalina 10.15.7
After installing HCE pro 1.3 a error message told me that this version needs at least MacOS11? Is that correct ?
Best regards
After installing HCE pro 1.3 a error message told me that this version needs at least MacOS11? Is that correct ?
Best regards
- Mark Uniacke
- Hiarcs Author
- Posts: 1459
- Joined: Sun Jul 29, 2007 1:32 pm
- Location: United Kingdom
- Contact:
Re: Version 1.3
The min macOS for HCE Pro v1.3 built on Qt 6.5 is macOS 11. We needed to use 6.5 to resolve some issues in the previous Qt version.
Is there a reason you cannot upgrade the Mac OS version?
Is there a reason you cannot upgrade the Mac OS version?
-
- Member
- Posts: 4
- Joined: Mon Oct 18, 2021 3:54 pm
Re: Version 1.3
Yes the only reason is that it's an 9 years old iMAC (Late 2013 bought in 2014)
-
- Member
- Posts: 33
- Joined: Sat Dec 09, 2023 10:16 pm
Re: Version 1.3
It's nearly 11 years old.rolandschott wrote: ↑Mon Feb 19, 2024 2:01 pm Yes the only reason is that it's an 9 years old iMAC (Late 2013 bought in 2014)
Buy a new iMAC with M3 chip https://www.apple.com/imac/
- Mark Uniacke
- Hiarcs Author
- Posts: 1459
- Joined: Sun Jul 29, 2007 1:32 pm
- Location: United Kingdom
- Contact:
Re: Version 1.3
That is frustrating, I know as I have had iMacs and two 17" MacBookPros that are now made obsolete by Apple despite the relatively good hardware. While Apple make some nice computers they are very expensive.rolandschott wrote: ↑Mon Feb 19, 2024 2:01 pm Yes the only reason is that it's an 9 years old iMAC (Late 2013 bought in 2014)
I will see what I can do for v1.3.1 to have a special version for those still stuck on older hardware/macOS versions 10.14 or later, unfortunately it will not have some fixes but should have most new improvements.
-
- Member
- Posts: 4
- Joined: Mon Oct 18, 2021 3:54 pm
Re: Version 1.3
Thank you very much for your answer.
I know that I'll have to change my old Mac for a new one soon. Many other programs can't be updated since a while.
Best regards
I know that I'll have to change my old Mac for a new one soon. Many other programs can't be updated since a while.
Best regards
Re: Version 1.3
Hi rolanschott !
I'm using an old MacMini late 2012 8/512, it's for me a perfect computer.
Apple M1, M2, M3, M…
My wife works on a MacBookAir M1, I bought a MacMini M2Pro.
Super !
But your old iMac works fine, I'm happy.
Seems to me that you can install recent OS on old machines using free software.
Even if this is not planned by Apple.
Maybe ?
Agree to Mark. Old Mac are good Mac.
Regards
JL
I'm using an old MacMini late 2012 8/512, it's for me a perfect computer.
Apple M1, M2, M3, M…
My wife works on a MacBookAir M1, I bought a MacMini M2Pro.
Super !
But your old iMac works fine, I'm happy.
Seems to me that you can install recent OS on old machines using free software.
Even if this is not planned by Apple.
Maybe ?
Agree to Mark. Old Mac are good Mac.
Regards
JL
-
- Member
- Posts: 33
- Joined: Sat Dec 09, 2023 10:16 pm
Re: Version 1.3
How can I do an automatic game analysis at night with 2 engines at the same time (Stockfish and LC0)?
I can't see WDL (Win/Draw/Loss) evaluation in the notation. BUG?
A: 8.Ne2 Stockfish dev-20231207-nogit: +0.47/35 (30/60/10) moves...
B: 8.a3 Lc0 v0.30.0+git.dirty: +0.38/14 (20/75/5) moves...
How to activate the WDL (Win/Draw/Loss) evaluation when analyzing a game?
+0.19/9 (10/85/5) 8.Qb6 9.Qc1 Be7 10.c3 O-O 11.g3 a5 12.Bg2 cxd4 13.Nexd4 Nc5 14.O-O Bd7 15.Qc2 Ne4
I can't see the engine name and accuracy compared to the engine in the notation at the bottom. BUG?
A: Stockfish 86% and then the informations with 0.12 centipawns per move, blunders, mistakes, inaccuracies…
B: LC0 89%, 0.09, blunders, mistakes, inaccuracies…
I can't see WDL (Win/Draw/Loss) evaluation in the notation. BUG?
A: 8.Ne2 Stockfish dev-20231207-nogit: +0.47/35 (30/60/10) moves...
B: 8.a3 Lc0 v0.30.0+git.dirty: +0.38/14 (20/75/5) moves...
How to activate the WDL (Win/Draw/Loss) evaluation when analyzing a game?
+0.19/9 (10/85/5) 8.Qb6 9.Qc1 Be7 10.c3 O-O 11.g3 a5 12.Bg2 cxd4 13.Nexd4 Nc5 14.O-O Bd7 15.Qc2 Ne4
I can't see the engine name and accuracy compared to the engine in the notation at the bottom. BUG?
A: Stockfish 86% and then the informations with 0.12 centipawns per move, blunders, mistakes, inaccuracies…
B: LC0 89%, 0.09, blunders, mistakes, inaccuracies…
Re: Version 1.3
Hi,HiarcsApple wrote: ↑Tue Feb 20, 2024 6:27 pm How can I do an automatic game analysis at night with 2 engines at the same time (Stockfish and LC0)?
After a quick & dirty try, I think this should work:
I assume the game you want to analyse is in a specific database (not WorkBase)
Copy/paste the game inside WorkBase
Now you can launch two analysis of the same game (one for each tab)
Once completed, copy the annotated(1) game from WorkBase and paste it to your specific database annotated(2) game using the 'Merge with current game' option. You should get annotated(1+2) as a result.
Give it a try and double check, I didn't test seriously.
Cheers,
Tibono
Re: Version 1.3
On the digital signature issue, thanks, Mark! I assume it's just a Norton issue, so I told Norton to allow it to run! :>)
-
- Member
- Posts: 33
- Joined: Sat Dec 09, 2023 10:16 pm
Re: Version 1.3
That sounds very difficult and unnecessarily complex.Tibono2 wrote: ↑Tue Feb 20, 2024 7:46 pmHi,HiarcsApple wrote: ↑Tue Feb 20, 2024 6:27 pm How can I do an automatic game analysis at night with 2 engines at the same time (Stockfish and LC0)?
After a quick & dirty try, I think this should work:
I assume the game you want to analyse is in a specific database (not WorkBase)
Copy/paste the game inside WorkBase
Now you can launch two analysis of the same game (one for each tab)
Once completed, copy the annotated(1) game from WorkBase and paste it to your specific database annotated(2) game using the 'Merge with current game' option. You should get annotated(1+2) as a result.
Give it a try and double check, I didn't test seriously.
Cheers,
Tibono
Re: Version 1.3
Sorry I "only" answered "how can I..." I understand your position, but you are actually looking for a feature for dummies. And a bit of a rough reply to a helpful gentleman.
Maybe I am a bit oldschool...
-
- Member
- Posts: 33
- Joined: Sat Dec 09, 2023 10:16 pm
Re: Version 1.3
My mistake.
Of course I am grateful for the hint.
But why do you think this is a function for dummies?
Any other chess GUI can do that.
I was thinking of:
1. select analysis engine 1 and 2.
2. start analysis and let it run overnight.
Done.
Re: Version 1.3
OK, that's indeed a "to be" feature request, rather than an "as is" solution.HiarcsApple wrote: ↑Fri Feb 23, 2024 10:47 pm I was thinking of:
1. select analysis engine 1 and 2.
2. start analysis and let it run overnight.
Done.
Thks for the kind reply, no worries
Best regards,
Tibono