Hi,
I made an update of my Tasc R30 page and added an instruction on how to build chess pieces on your own. It's in German - use Google's translator (that's real fun - queen=lady) or wait until I'll do the translation !
Happy soldering Regards, Michael
Tasc R30 - Build Chess Pieces On Your Own
Moderators: Harvey Williamson, Steve B, Watchman
Forum rules
This textbox is used to restore diagrams posted with the fen tag before the upgrade.
This textbox is used to restore diagrams posted with the fen tag before the upgrade.
- chesspcmac
- Member
- Posts: 250
- Joined: Sun Feb 05, 2012 2:58 am
- Location: Richmond, Virginia
Excellent!!! Thanks for Sharing!!! After taking my renewal of medical boards I would try to do this as my pet project. Hopefully by then A translation would be available.
Again...Thank you
Good to know stuff Regards
Mike
Again...Thank you
Good to know stuff Regards
Mike
"Sir, the slowness of genius is hard to bear, but the slowness of mediocrity is insufferable"
Henry Thomas Buckle
Henry Thomas Buckle
- Cyberchess
- Full Member
- Posts: 658
- Joined: Wed Jan 08, 2014 6:10 pm
Thanks for sharing this most excellent and informative article!
This is interesting in that rather than utilizing simple reed switches, the TascR30 system uses individual Tank Circuits in each of the pieces. The system polls each square at high speed, and then, according to the resonant frequency, identifies each piece as it changes location. One also has the option of using the originally designed analog board or a digital equivalent. Personally, I’d tend to favor the former due to its inherent simplicity.
Since my understanding of German is quite limited, I used the Google Translator with your page’s URL.
I’m wondering if Dave Kittinger’s WChess program for Windows 98 would work with the 2 EPROM TascR30 system?
Resonant Regards,
John
This is interesting in that rather than utilizing simple reed switches, the TascR30 system uses individual Tank Circuits in each of the pieces. The system polls each square at high speed, and then, according to the resonant frequency, identifies each piece as it changes location. One also has the option of using the originally designed analog board or a digital equivalent. Personally, I’d tend to favor the former due to its inherent simplicity.
Since my understanding of German is quite limited, I used the Google Translator with your page’s URL.
I’m wondering if Dave Kittinger’s WChess program for Windows 98 would work with the 2 EPROM TascR30 system?
Resonant Regards,
John
- blaubaer
- Full Member
- Posts: 935
- Joined: Thu Jul 28, 2011 12:53 pm
- Location: Bavaria, the centre of Mysticum
- Contact:
Hi Mike and John,
Regards, Michael
I would say yes, because Google Translator has definitely it's limits...chesspcmac wrote:...Hopefully by then A translation would be available...
Absolutely right - but the digital equivalent was a lot cheaper for Tasc to produce, although more components were needed, because the calibration effort was less compared to the analog system. You'll see that when you will produce your own chess pieces - it's try and error...Cyberchess wrote:....This is interesting in that rather than utilizing simple reed switches, the TascR30 system uses individual Tank Circuits in each of the pieces. The system polls each square at high speed, and then, according to the resonant frequency, identifies each piece as it changes location. One also has the option of using the originally designed analog board or a digital equivalent. Personally, I’d tend to favor the former due to its inherent simplicity....
I never tested it, but I'm quite sure that it won't work without adaptation of the WChess software.Cyberchess wrote:...I’m wondering if Dave Kittinger’s WChess program for Windows 98 would work with the 2 EPROM TascR30 system?...
Regards, Michael