Hello chess friends,
My questions are:
a) how should I proceed to remove the module ESBII Board? I say this because it seems to me that they are well fixed;
b) On the other hand, I know that only this board accepts the ESBII module;
c) and about auction on ebay? is totally different than mine?
http://www.ebay.de/itm/Schachcomputer-M ... SwaA5WlRzA
Back to Mephisto ESB - Helpsssss
Moderators: Harvey Williamson, Steve B, Watchman
Forum rules
This textbox is used to restore diagrams posted with the fen tag before the upgrade.
This textbox is used to restore diagrams posted with the fen tag before the upgrade.
- dedicate computers
- Member
- Posts: 460
- Joined: Wed Aug 01, 2007 2:13 am
- Location: São Paulo
Re: Back to Mephisto ESB - Helpsssss
Hi,dedicate computers wrote:Hello chess friends,
My questions are:
a) how should I proceed to remove the module ESBII Board? I say this because it seems to me that they are well fixed;
b) On the other hand, I know that only this board accepts the ESBII module;
c) and about auction on ebay? is totally different than mine?
http://www.ebay.de/itm/Schachcomputer-M ... SwaA5WlRzA
I don't own one, but maybe you can get wiser here :
http://www.schachcomputer.info/forum/sh ... t=ESB+6000
It seems to me that you have the earliest version while the version on ebay is simply a later variant (that also accepts the III modue)
regards
Xavier[/url]
- Steve B
- Site Admin
- Posts: 10144
- Joined: Sun Jul 29, 2007 10:02 am
- Location: New York City USofA
- Contact:
Re: Back to Mephisto ESB - Helpsssss
Hi Oswaldodedicate computers wrote:Hello chess friends,
My questions are:
a) how should I proceed to remove the module ESBII Board? I say this because it seems to me that they are well fixed;
b) On the other hand, I know that only this board accepts the ESBII module;
first remove the brikett
you wiggle the brickett back and forth(from left to right) lifting it upwards and it will come loose from the board..do so very slowly and gently
then you grasp the ESBII module by the indentation you see and pry the module upward..again..slowly and gently
be very very careful...the brikett and module are connected by very thin leads to the board and they can bend easily
Delicate Regards
Steve